Timer Saver

Timer Saver

Southwestmetal restoration provides Time Saver service. We have a 24 inch wide machine is also  capable of handling 8 ‘tube. The Wet process ensures that your parts don’t get damage. Fast reliable service
  • Tube.
  • Plate.
  • Sheets
  • Square Bars.
  • Beams.
  • Flat Bar.   

Type of Metal

  • Brass 
  • Bronze 
  • Stainless steel 
  • Aluminium 

Types of finishes

  • No. 1; this is a dull and slightly rough surface, which is the starting finish on sheets of a hot rolled, tempered, etched and passivated process.
  • No. 2D; this dull finish is superior to a No. 1 finish and is the starting finish on sheets of a cold rolled, tempered, etched and passivated process.
  • No. 2B; this is a glossy finish on sheets, due to a cold rolled, polished, tempered, etched and passivated process.
  • No. 2BA; this is a mirror-like finish with some imperfections. BA stands for Bright Annealed, which is made in a controlled atmosphere.
  • No. 3 or No. 4; these finishes can be obtained with abrasive belts ranging from grit 120 or 180 to even 240 or 320. No. 3 and No. 4 are often used for escalators, elevators and architectural buildings for example.
  • No. 5; a finish applied with non-woven abrasive.
  • No. 6 or No. 7; a finish of which the surface is processed with grinding compounds. With no. 7 there are additional cotton mops, which are polish compounds.
  • No. 8; a true mirror finish, produced on sheets with the use of discs. This process uses a mixture of abrasive compound and water to do the polishing.
  • Non-directional finish; products with this type of finish can be put in every possible direction.
  • Hairline finish; this finish has a long, continuous straight lines parallel to the length of the sheet metal.
  • DUPLO finish; which is a finish with combination of first abrasive belt and then Scotch-Brite brush, and a great finish for the food processing industry.
  • Microlon finish; applied with Scotch-Brite brushes or even Scotch-Brite belts.